Events: Ramp set up weekend
Print Page | Close Window

Ramp set up weekend

Printed From: ProfessorPaddle.com
Category: General
Forum Name: Events
Forum Discription: Read and Discuss Upcoming Events. Please Post Trips through the Trips Tool.
URL: http://www.professorpaddle.com/forum/forum_posts.asp?TID=9551
Printed Date: 03 May 2025 at 10:59am


Topic: Ramp set up weekend
Posted By: rokmnky
Subject: Ramp set up weekend
Date Posted: 10 May 2010 at 12:38pm
The time is rapidly coming. This weekend is the Pre ball party/ Ramp set up weekend. We need as many people as we can get to help set up this bad boy. The new 2 piece design should be easier to set up so we can do more paddling and less grunt work.

The plan is to load the trailer friday afternoon and head straight to phil's place(where the ball was last year). Anyone who would like to come help can come on out. This year providing we have enough people, we are going to try and organize shifts so that no one gets too burned out and everyone gets some paddling time.

We should be ok on tools for now but that may change as I get thru the final prep.

I will bring beer for the masses, probably a couple of cases but feel free to byob to insure a plentiful flow with no drunkin beer runs.

So all I wanna know is who's coming with me?


Replies:
Posted By: James
Date Posted: 10 May 2010 at 1:11pm
I will be there for sure.

Posted By: rokmnky
Date Posted: 11 May 2010 at 4:03pm
Current plan of attack is to load friday morning in seattle and head to phil's. I am hoping to leave by noon at the latest putting us out there early afternoon.

If anyone needs directions pm me and I'll make sure to get it to you.

Even if your just out that way boating for the weekend come by and say hi.

Posted By: Larry
Date Posted: 11 May 2010 at 4:55pm
I said this on a different thread, but I'll post again here.

I have all day Fri. and Sat. but would have to come back some time Sat. night. If that fits anyone's schedule that I can go with (and help out with gas), or would like to go with me (and split the cost of gas), then I am in. I just can't afford to drive out there otherwise.

Let me know.

On a side note, if I drive (and maybe even if I don't) i can bring lots of cordless power tools.

Posted By: jP
Date Posted: 11 May 2010 at 7:29pm
I'm planning on being there, two. Bringing two cordless drills, each with two crappy batteries and chargers for said crappy batteries.

C ya out there! I'll be touching base with folks later this week!!!


-------------
🐋🐋🐋🐋🐋🐋🐋🐋🐋🐋🐋

Posted By: jP
Date Posted: 11 May 2010 at 7:32pm
I'll also be bringing the following:

My Creekboat
My River Runner
My Playboat
My library of whitewater literature, if anyone wants to take a few minutes to peruse it-some of these books are out f print and entertaining for various reasons

My positive attitude (I'm leaving the negative one in Seattle)


-------------
🐋🐋🐋🐋🐋🐋🐋🐋🐋🐋🐋

Posted By: jP
Date Posted: 11 May 2010 at 7:33pm
Sorry, James- my Squirty ain't ready yet! mostly I need a new skirt for it, and I don't know when I can get one, but the work is almost done!!!

-------------
🐋🐋🐋🐋🐋🐋🐋🐋🐋🐋🐋

Posted By: rokmnky
Date Posted: 11 May 2010 at 7:43pm
Thanks for the response guys. Please remember to mark your tools so there is no confusion at the end of the weekend.

Posted By: James
Date Posted: 11 May 2010 at 7:45pm
thats alright, after careful inspection I don't think the snatch has that many epic spots anyhow, of course that ain't fer certain till you sink em right?

But for surhzilll i'll be sporting the squirty on my cooper trips, an you know why shhh.... I want the first ride in that one!!!

Posted By: jP
Date Posted: 12 May 2010 at 4:16pm
--any you'll likely gett'er!!
 
Ramp didly do: Just a heads up it looks like I'll be around some on Friday to help.
Saturday I will likely be tied up with recent obligation$ in my $alto, but later in the day I should be around. Sunday I'll be around.


-------------
🐋🐋🐋🐋🐋🐋🐋🐋🐋🐋🐋

Posted By: septimus prime
Date Posted: 12 May 2010 at 8:43pm
I plan on coming over on Friday to help/drink/creek all weekend. Thanks,  Dan and Adam for all you have done!

-------------
Jon Shell Bee


Print Page | Close Window